WARM4

WARM4 is a professional four channel analogue rotary DJ mixer, designed and manufactured by ECLER in Barcelona. Featuring 4 phono/line channels, 2 MIC inputs, classic sharp filters and a 4th order Isolator. WARM4 includes an unique feature, an Analogue Subharmonic Synthesizer selectable per channel, specially designed to generate and reinforce ultra-low frequencies.

  • 4 Mixing channels.
  • 4 PHONO inputs.
  • 4 LINE inputs.
  • 2 MICRO inputs.
  • Master Output on XLR and RCA connectors.
  • Booth Output on XLR and RCA connectors.
  • Headphone Monitor Output on 6.3mm Jack and 3.5mm mini-jack.
  • 3 Band full EQ cut.
  • 3 Band Isolator (300Hz and 4KHz, -∞/+12dB, 4th order 24dB/oct ).
  • Analogue Subharmonic Synthesizer for sub-bass frequency reinforcement selectable per channel.
  • Maximum Output without distortion: 21dBV (23dBu).
  • FX Send control and Pre/Post fader selector per channel.
  • FX Return control and PFL.
  • Alps metal shaft high quality potentiometers.
  • Mechanized from a solid block of aluminium knob, without visible screw. Ecler Unique design.
  • Wooden side panels included.

• Night Clubs 
• DJs studios 
• Itinerant DJ performances 

AUDIO
PERFORMANCES

Number of Inputs:
LINE : 4 Stereo Unbalanced Inputs
PHONO : 4 Stereo Unbalanced Inputs
MICRO : 2 Mono Balanced Inputs
FX RETURN : 1 Stereo Unbalanced Input

Connectors type:
LINE 1-2-3-4 : RCA STEREO
PHONO 1-2-3-4 : RCA STEREO
MICRO 3 : XLR3-F
MICRO 4 : Combo XLR3F-6.3mm TRS BAL

FX RETURN : RCA STEREO

Inputs Sensitivity nom/Impedance:
LINE : 0dBV/50kΩ
PHONO : -40dBV/50kΩ
MICRO : -50dBV/>1kΩ
FX RETURN : 0dBV/>6kΩ

Frequency Response:
LINE : 10Hz÷30kHz -1dB
MICRO : 10Hz÷25kHz -1dB
PHONO : RIAA ±0.5dB
FX RETURN : 10Hz÷50kHz -1dB

THD+N:
LINE : <0.004%
MICRO : <0.7%
PHONO : <0.06%
FX RETURN : <0.001%

CMMR:
MICRO : >75dB @ 1kHz

Signal Noise Ratio:
LINE : >105dB
MICRO : >90dB
PHONO : >100dB
FX RETURN : >110dB

Trim control / Tone control Inputs 1-2-3-4:
INPUTS 1-2-3-4 : ± 15dB
BASS : +10/-30dB
MID : +10/-25dB
TREBLE : +10/-30dB

Trim control / Tone control Isolator:
BASS : +12/-70dB
MID : +12/-40dB
TREBLE : +12/-70dB

Tone Filter cut frequency at -6dB (slope 12dB/oct):
BASS : 200Hz
MID : 200Hz÷6.8kHz
TREBLE : 6.8kHz

Isolator cut frequency at -6dB (slope 24dB/oct):
BASS : 300 Hz
MID : 300Hz÷4kHz
TREBLE : 4kHz

Analogue Subharmonic Synthesizer:
Input selective filter : 50÷120Hz
Harmonics synthesis : 25÷60Hz
Max Output level : +12dBV

Number of Outputs:
HOUSE : 1 Stereo Balanced Outputs / 1 Stereo Unbalanced Outputs
BOOTH : 1 Stereo Balanced Outputs / 1 Stereo Unbalanced Outputs
HEADPHONE : 2 Stereo Unbalanced Outputs
FX SEND : 1 Stereo Unbalanced

REC : 1 Stereo Unbalanced

Connectors Type:
HOUSE : XLR3-M STEREO / RCA STEREO
BOOTH : XLR3-M STEREO / RCA STEREO
HEADPHONE : Jack Stereo 6.3mm / Jack Stereo 3.5mm
FX SEND : RCA STEREO

REC : RCA STEREO

Outputs Level/Minimum Load:
HOUSE (BAL) : 0dBV/600Ω 1V *(+12dB 4V)
HOUSE (UNBAL) : 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (BAL) : 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (UNBAL) : 0dBV/2.2kΩ 1V *(+12dB 4V)

REC : 0dBV/10kΩ
HEADPHONES : 200mΩ/200Ω THD 1%
FX SEND : 0dBV/2.2kΩ

Max Undistorted Output Level:
HOUSE (Electr.BAL) : 21dBV (23dBu)
BOOTH (Electr.BAL) : 21dBV (23dBu)
HOUSE (UNBAL) : 21dBV (23dBu)
BOOTH (UNBAL) : 21dBV (23dBu)

TECHNICAL
SPECIFICATIONS

Control Mode : Rotary with Alps Blue Velvet Potentiometers and Alps RK09L potentiometers
Phantom Voltage : 18VDC/5mA Max (Default ON)
Input VU-Meter : LED 12 segments (-38dBV ÷ +10dBV)
House-Mix-Booth VU-Meter : LED 12 segments (-30dBV ÷ +20dBV)
Subharmonic Output VU-Meter : LED 3 Segments (-20dBV / 0dBV / +4dBV)

Power Supply : Internal
AC Mains Voltage : 90-264VAC 47-63Hz
AC Main Connector : 15A IEC inlet connector
Rated power consumption : 39 VA

Operating Temperature : -5˚C ÷ 45˚C / 23˚F ÷ 113˚F
Operating Humidity : 20 – 90% RH (no condensation)
Storage Temperature : -10°C ÷ 50˚C / 14°F ÷ 122˚F
Storage Humidity : <90% RH (no condensation)
Operating Humidity : 20 – 90% RH (no condensation)
Installation Options : Desktop or Rack mount with optional accessories
Included Accessories : IEC Cable EU
Dimensions (WxHxD) : 34.0 x 8.1 x 37.2 cm / 13.39 x 3.19 x 14.65 in
Weight : 5.32 Kg / 11.73 lb
Shipping Dimensions (WxHxD) : 49.5 x 17.5 x 43.5 cm / 19.49 x 6.89 x 17.13 in
Shipping Weight : 6.74 Kg / 14.86 lb

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

WARM4 is Ecler's newest rotary analogue mixer, inspired by New York's Paradise Garage, described by François Kevorkian as the "temple of music" and whose influence has significantly shaped some of today's best clubs.

Designed and manufactured in our Barcelona facilities, WARM4 is a mixer that keeps in mind the classic Ecler mixers structure, with completely redesigned circuitry and mechanics. This goes from the new PCB board that further improves noise level and dynamic range, to the front-plate screwed potentiometers, carefully hand-assembled by our production team.

Keeping alive its innovative spirit since the first A4 mixer in 1971, Ecler introduces a dj tool never included in a mixer before: an analogue subharmonic synthesizer. Inspired by the original device installed in the Paradise Garage booth,  we have created our own circuit that allows the subharmonic generator to be tuned to different frequencies so that the dj can adapt it according to the recorded song and the features of the sound system.

In WARM4 you will also find the 4th order Isolator filter already included in WARM2, as well as 4 mixing channels, 3-band full EQ cut per channel and Alps metal shaft high quality potentiometers. Using your favourite external effects module has never been easier. WARM4 offers you the opportunity to send the PRE/POST fader signal, as well as regulate and pre-listening to the amount of effects return.

WARM4 is specially designed for sound systems capable of reproducing this type of subsonic frequencies, clubs, festivals and events where subwoofers are of vital importance. Bring to your audience an unprecedented experience on the dancefloor and a different way of feeling the music.

Download

WARM4 DATA SHEET

Download

WARM4 USER MANUAL

Play Video

Why Ecler?

Top Quality
Built

All circuits are strictly designed, mounted and tested at Ecler facilities in Barcelona.

Reliable DJ
mixers

Over 50 years of experience in analogue audio design and 40 years in dj mixers manufacturing.

We develop products
by listening to you

Appreciating the great community of Ecler DJ supporters around the world.

Subscribe to Ecler DJ Community Newsletter